83. Exhaust Manifold Installation - Left

Exhaust Manifold Installation - Left







Notice: Refer to Fastener Notice in Service Precautions.
Fastener Notice


1. Install the exhaust manifold studs.
- Tighten the exhaust manifold studs to 18 Nm (13 ft. lbs.).

2. Install the exhaust manifold gasket.
3. Install the exhaust manifold.

4. Install the exhaust manifold nuts.
- Tighten the exhaust manifold nuts to 16 Nm (12 ft. lbs.).

5. Install the left side spark plugs.
- Tighten the spark plugs to 27 Nm (20 ft. lbs.) when installing spark plugs into,a new cylinder head.
- Tighten the spark plugs to 15 Nm (13 ft. lbs.) when re-installing after initial installation.







6. Install the exhaust manifold heat shield.
7. Install the exhaust manifold heat shield bolts.
- Tighten the exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).