Rear Suspension
STABILIZER SHAFT LINK REPLACEMENTREMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the stabilizer shaft link nut from the stabilizer shaft link (1) and the stabilizer shaft (2).
3. Remove the stabilizer shaft link nut from the stabilizer shaft link (1) and the strut.
4. Remove the stabilizer shaft link (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the stabilizer shaft link (1) to the vehicle.
2. Connect the stabilizer shaft link (1) to the stabilizer shaft (2).
3. Install the stabilizer shaft link nut to the stabilizer shaft link (1) and the stabilizer shaft (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 35 N.m (26 lb ft).
4. Connect the stabilizer shaft link (1) to the strut.
5. Install the stabilizer shaft link nut to the stabilizer shaft link (1) and the strut.
Tighten
Tighten the nut to 35 N.m (26 lb ft).
6. Lower the vehicle.