Seat Cushion Heater Element Replacement - Front (Aztek)

Seat Cushion Heater Element Replacement - Front (Aztek)

Removal Procedure

1. Remove the front bucket seat. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .
2. Remove the seat back. Refer to Seat Back Replacement - Front (Seat Back Replacement - Front) .
3. Remove the seat adjuster. Refer to Seat Adjuster Replacement - Front (Seat Adjuster Replacement - Front) .
4. Disconnect the electrical connector for the heated seat, if equipped.




5. Remove the J-hook retainers at the front of the seat cushion cover.




6. Remove the J-hook retainers on the sides of the cover.




7. Remove the J-hook retainers at the rear of the cover.




8. Remove the hook and the loop retainers securing the cover to the cushion.




9. Remove the hog rings from the cover.
10. Remove the cover from the front seat cushion.
11. If the cushion is damaged, replace the cushion.
12. Remove the seat cushion heater element.



Installation Procedure

1. Install the seat cushion heater element.




2. Install the cover onto the front seat cushion.
3. Install the hog rings to the front seat cushion cover.




4. Install the J-hook retainer on the front of the cover.




5. Install the J-hook retainers on the sides of the cover.




6. Install the J-hook retainer on the rear of the cover.




7. Install the hook and the loop retainers securing the cover to the cushion, by pressing in place until fully seated.
8. Install the seat adjuster. Refer to Seat Adjuster Replacement - Front (Seat Adjuster Replacement - Front) .
9. Connect the electrical connector for the heated seat, if equipped.
10. Install the seat back. Refer to Seat Back Replacement - Front (Seat Back Replacement - Front) .
11. Install the bucket seat. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .