Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Armrest Replacement - Front Seat

ARMREST REPLACEMENT - FRONT SEAT

REMOVAL PROCEDURE




1. Remove the armrest bolt trim cap using a small flat-bladed tool.




2. Remove the bolt from the armrest.
3. Remove the armrest from the front bucket seat.

INSTALLATION PROCEDURE




1. Position the bolt into the mounting point of the armrest.




2. Position the armrest to the front bucker seat.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Tighten the armrest mounting bolt.

Tighten
Tighten the armrest mounting bolt to 4.5 N.m (40 lb in).

IMPORTANT: Rotate the armrest bolt trim cap to a new position to allow the retainer on the cap to seat properly.




4. install the armrest bolt trim cap pressing into place until fully seated.
5. Inspect the armrest for proper movement.