Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2004 >> Aztek AWD V6-3.4L VIN E >> Repair and Diagnosis >> Body and Frame >> Tailgate >> Tailgate Shock / Support >> Service and Repair >> Strut Replacement - Endgate
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Strut Replacement - Endgate



Strut Replacement - Endgate

Removal Procedure

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.






1. Open the endgate.

Notice: Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.

2. Lift up the retainer clips on the endgate assist rods using a small flat-bladed tool.




3. Remove the upper end of the assist rods from the ball joint.




4. Remove the lower end of the assist rods from the ball joint.




5. Remove the assist rods from the endgate.



Installation Procedure





1. Position the assist rods to the endgate.




2. Install the upper end of the assist rods to the ball joint. Press in to place until fully seated.




3. Install the lower end of the assist rods to the ball joint. Press in to until fully seated.
4. Close the endgate.


pro multis · About Operation CHARM