Support Cable Replacement - Endgate

Support Cable Replacement - Endgate

Removal Procedure





1. Open the endgate.
2. Support the endgate in the open position.
3. Remove the bolts from the endgate support cable.
4. Remove the endgate support cable from the endgate.



Installation Procedure





1. Position the endgate support cable to the endgate.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts to the endgate support cable.

Tighten the endgate support cable bolts to 3 N.m (27 lb in).

3. Remove the support from the endgate.
4. Close the endgate.