Aspirator: Service and Repair
ASPIRATOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the I/P carrier.
2. Remove the aspirator hose mounting screw.
3. Disconnect the aspirator hose from the aspirator duct adapter (1).
4. Remove the aspirator hose from the HVAC module.
INSTALLATION PROCEDURE
1. Install the aspirator hose to the HVAC module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the aspirator hose retaining screw.
Tighten
Tighten the screw 0.9 N.m (8 lb in).
3. Connect the aspirator hose to the aspirator duct adapter (1).
4. Install the I/P carrier.