Selector Cable Bracket Replacement

Automatic Transmission Range Selector Cable Bracket Replacement

Removal Procedure
1. Remove the throttle body air inlet duct.
2. Use a flat-bladed tool in order to remove the automatic transaxle range selector cable from the cable lever and the bracket.





3. Remove the automatic transaxle range selector cable bracket bolts.
4. Remove the automatic transaxle range selector cable bracket.

Installation Procedure





1. Install the automatic transaxle range selector cable bracket.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the automatic transaxle range selector cable bracket bolts.
Tighten the automatic transaxle range selector cable bracket bolts to 25 Nm (18 ft. lbs.).
3. Install the automatic transaxle range selector cable to the cable lever and the bracket.
4. Adjust the automatic transaxle range selector cable.
5. Install the throttle body air inlet duct.