Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2004 >> Bonneville V6-3.8L VIN K >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> HVAC System - Automatic >> Blower Motor Control Processor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Blower Motor Control Processor Replacement

BLOWER MOTOR CONTROL PROCESSOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right sound insulator.
2. Remove the instrument panel compartment.
3. Remove the Dash Integration Module (DIM) from the bracket and position aside.
4. Remove the rear DIM bracket screws and lower the bracket enough to access the blower module.




5. Disconnect the electrical connector (1).
6. Remove the blower control module retaining screw.
7. Remove the blower control module.

INSTALLATION PROCEDURE
1. Install the blower control module.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the retaining screw.

Tighten
Tighten the screw to 2 N.m (18 lb in).




3. Connect the electrical connector (1).
4. Install the DIM bracket screws.

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

5. Install the DIM into the bracket.
6. Install the instrument panel compartment.
7. Install the right sound insulator.
pro multis · About Operation CHARM