Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
133. Generator Installation
Generator Installation
1. Place the generator in position.
2. Install the generator side bolt finger tight.
3. Install the generator front bolts finger tight.
Notice: Refer to Fastener Notice in Service Precautions.
4. Tighten the generator bolts in the sequence shown. Tighten
4.1. Tighten the generator front upper bolt to 50 Nm (37 ft. lbs.).
4.2. Tighten the generator side bolt to 50 Nm (37 ft. lbs.).
4.3. Tighten the generator front lower bolt to 50 Nm (37 ft. lbs.).