Steering Wheel Position Sensor or Steering Shaft Lower Bearing
Steering Wheel Position Sensor or Steering Shaft Lower Bearing ReplacementRemoval Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the steering column from the vehicle.
3. Remove the following from the steering shaft:
3.1. Boot seal (5)
3.2. Steering shaft seal (4)
3.3. Sensor retainer (3)
3.4. Sensor locator (2)
3.5. Steering wheel position sensor (1).
Installation Procedure,
1. Install the following onto the steering shaft:
1.1. Steering wheel position sensor (1).
1.2. Sensor locator (2)
1.3. Sensor retainer (3)
1.4. Steering shaft seal (4)
1.5. Boot seal (5)
2. Install the steering column to the vehicle.
3. Enable the SIR system.