Accelerator Pedal Position Sensor: Service and Repair

Accelerator Controls Cable Replacement

Removal Procedure

1. Remove the two fuel rail covers.

2. Remove the throttle relaxer cover (1).

3. Remove the throttle control cable (4).





4. Open the retainer clip at the intake manifold, and remove the cable (3) from the clip.





5. Lift the throttle cable (2) up at the throttle body mounting bracket, then remove the cable from the throttle body cam lever (1).

6. Remove throttle cable from the vehicle.





Installation Procedure

1. Install the throttle cable (2) to the throttle body cam lever (1).

2. Attach the throttle cable (2) to the throttle body mounting bracket.





3. Attach the throttle cable (3) to the retaining clip over the intake manifold.





4. Attach the throttle cable to the throttle relaxer.

5. Install the throttle relaxer cover (1).

6. Install both engine dress covers.





Accelerator Controls Pedal Replacement

1. Remove the two fuel rail covers.

2. Remove the throttle relaxer cover (1).

3. Remove the cruise control cable (2).

4. Remove the accelerator pedal cable (3).