Sunroof / Moonroof Module: Service and Repair

SUNROOF CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Close the sunroof.
2. Remove the headliner, as necessary.




3. Disconnect the wire harness connectors from both ends of the sunroof control module.
4. Remove the nylon tie straps from the sunroof control module.
5. Release the control module retainers from the metal bracket by sliding the module towards the middle of the vehicle.
6. Remove the sunroof control module from the vehicle.

INSTALLATION PROCEDURE




1. Connect the wire harness connectors to the sunroof control module.
2. Install the control module to the sunroof module by sliding the control module towards the left side of the vehicle to engage the retainers.
3. Install the nylon tie straps to the control module.
4. Install the headliner.