Power Window Motor: Service and Repair

Power Window Motor Replacement

Removal Procedure

Important: Motor and actuator must be removed as an assembly. Do not attempt separation of motor and actuator. Replacement parts are not available separately.

1. Remove the door trim panel.
2. Remove the electrical connection from the power window motor.
3. Remove the power window motor retaining bolts.




4. Remove the power window motor assembly from the vehicle.

Installation Procedure




1. Install the power window motor assembly to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the power window motor retaining bolts.

Tighten the power window motor retaining bolts to 6 N.m (53 lb in).

3. Install the electrical connector to the power window motor.
4. Install the door trim panel.