Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Valve Body: Service and Repair

Control Valve Body Replacement

Removal Procedure
1. Remove the transmission side cover.





2. Remove the bolts (9, 12 and 16) from the control valve body assembly (18).
3. Remove the control valve body assembly (18).
4. Remove and discard the valve body to spacer plate gasket (22).

Installation Procedure





1. Install the control valve body to spacer plate gasket (22) onto the spacer plate (23).
2. Install the control valve body assembly (18) onto the gasket (22).





3. Inspect the TFP switch assembly (13) in order to verify the condition and correct location of the seven pressure switch O-rings.
4. If necessary replace the pressure switch O-rings.





5. Install the TFP switch assembly (13) onto the control valve body assembly.





6. Install the eighteen control valve body assembly bolts.

Notice: Refer to Fastener Notice in Service Precautions





7. Hand start the bolts.
Tighten the bolts to 14 Nm (124 inch lbs.).
8. Install the transmission side cover.