Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2004 >> Vibe FWD L4-1.8L VIN L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Instrument Panel >> Audible Warning Device Control Module >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement



Multifunction Alarm Module Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.

Important: The multifunction alarm module is located under the instrument panel on the drivers side.


2. Remove the screws from the junction block and position the junction block in order to gain access to the multifunction alarm module.




3. Disconnect the multifunction alarm module electrical connector.
4. Disconnect the multifunction alarm module (1) from the rear of the junction block (2).



Installation Procedure





1. Install the multifunction alarm module (1) to the rear of the junction block (2).
2. Connect the multifunction alarm module electrical connector.
3. Reposition the junction block back into position. Secure the junction block with the screws.
4. Connect the negative battery cable.


pro multis · About Operation CHARM