12. Control Valve Body Assembly Removal

Control Valve Body Assembly Removal





1. Remove the indicated control valve body bolts (374-381, 384).





2. Carefully lift the fluid pressure manual valve position switch assembly (395) off of the control valve body (300). Handle the switch assembly carefully, it is very delicate.





3. Remove the control valve body assembly (300).
4. Remove the two retainers (368) from the valve body assembly.
5. Remove the spacer plate and gasket assembly (396) with the two screen/seal assemblies (382) from the valve body (300).
^ Remove the six ball check valves (372, 373) from the valve body (300).
^ Remove the case cover pin (410).





6. Remove the four ball check valves (372) from the case cover (400).