Front Door Limiter: Service and Repair

Door Check Link Replacement - Front

Removal Procedure

1. Remove the door inner trim panel.
2. Remove the front door water deflector.




3. Remove the front door check link bolt (1).




4. Remove the front door check link nuts (1).




5. Remove the front door check link from the door.

Installation Procedure






Important: The letters R and L are molded into the check link arm. If you are installing on the right side, the letter R must face up. If you are installing on the left side, the letter L must face up.

1. Position the front door check link to the door.

Notice: Refer to Fastener Notice in service Precautions.

2. Install the front door check link nuts.

Tighten the nuts to 10 N.m (89 lb in).




3. Install the front door check link bolt.

Tighten the bolt to 9 N.m (80 lb in).

4. Install the front door water deflector.
5. Install the front door inner trim panel.