Oil Filter: Service and Repair

Engine Oil and Oil Filter Replacement
Removal Procedure

1. Caution: Refer to Battery Disconnect Caution in Service Precautions.

Remove the negative battery cable.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the oil pan bolt.





4. Remove the oil filter.

Installation Procedure





1. Install the oil filter.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the oil pan drain bolt.
Tighten the oil pan drain bolt to 26 Nm (19 ft. lbs.).
Lower the vehicle.
3. Fill the engine with oil to the appropriate mark.
4. Install negative battery cable.
5. Start engine and inspect for leaks.