Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2006 >> G6 V6-3.9L VIN 1 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair



MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the positive crankcase ventilation (PCV) fresh air tube from the air cleaner intake duct.
2. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector.




3. Loosen the clamps and remove the air cleaner intake duct with the MAF/IAT sensor from the throttle body and the air cleaner housing cover.
4. Loosen the clamp and remove the MAF/IAT sensor from the air cleaner intake duct.

INSTALLATION PROCEDURE




1. Install the MAF/IAT sensor to the air cleaner intake duct.

NOTE: Refer to Fastener Notice.

Tighten the clamp to 2 N.m (18 lb in).

2. Install the air cleaner intake duct with the MAF/IAT sensor to the throttle body and the air cleaner housing cover.

Tighten the clamps to 2 N.m (18 lb in).




3. Connect the MAF/IAT sensor electrical connector.
4. Install the PCV fresh air tube to the air cleaner intake duct.
5. Start and idle the engine.
6. Inspect the air intake duct for leaks.
pro multis · About Operation CHARM