25. Camshaft Position Actuator Magnet Removal

This article or image reflects the changes called out in TSB#05-06-01-027

Dated 09/16/05

For the following vehicles 2006 Buick Terraza,2006 Chevrolet Impala, Malibu, SS, Malibu Maxx, Monte Carlo, Uplander, 2006 Pontiac G6, Montana SV6 and 2006 Saturn Relay with 3.5 L or 3.9 L ( VIN's N, K, 1 & RPO's LZ4, LZE, And LZ9).


Notice: Use only a Torx Plus bit when removing or Installing Camshaft Position Actuator retention fasteners.



Camshaft Position Actuator Magnet Removal





1. Remove the camshaft position actuator magnet bolts.
2. Remove the camshaft position actuator magnet and O-ring seal.