Front Caster and Camber Adjustment

Front Caster and Camber Adjustment





Important
1. Adjust settings in the following order:
^ Camber
^ Caster
^ Toe
2. The camber and caster adjustment can affect each other. Always double check the settings before final fastener tightening.

1. Loosen the lower control arm cam bolts.
2. Rotate the cam bolts to the required camber setting. Maintain the camber setting while tightening the cam bolts.
3. Rotate the cam bolts to the required caster setting. Maintain the caster setting while tightening the cam bolt nuts.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Maintain the caster or camber setting while tightening the cam bolt nuts.

Tighten
Tighten the front lower control arm cam bolt nuts to 165 N.m (122 lb ft.)

5. Check the caster and camber settings after tightening.
6. Adjust the caster and camber setting if necessary.
7. Adjust the front toe.