Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2007 >> G5 L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position Sensor Replacement - Exhaust
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Camshaft Position Sensor Replacement - Exhaust



Camshaft Position Sensor Replacement - Exhaust

Removal Procedure




1. Remove the intake manifold cover.
2. Disconnect the exhaust camshaft position (CMP) sensor electrical connector (1).




3. Remove the CMP sensor bolt. Intake CMP shown, exhaust CMP similar.
4. Remove the CMP sensor.

Installation Procedure






Important: Inspect the CMP sensor for damage, replace as necessary.

1. Lubricate the CMP sensor O-ring seal with clean engine oil.
2. Install the CMP sensor. Intake CMP shown, exhaust CMP similar.

Notice: Refer to Fastener Notice.

3. Install the CMP sensor bolt.

Tighten the bolt to 10 N.m (89 lb in).




4. Connect the exhaust CMP sensor electrical connector (1).
5. Install the intake manifold cover.
pro multis · About Operation CHARM