Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2007 >> G6 V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4T65-E Automatic Transaxle >> Assemble, Disassemble, and Installation >> Case Cover Bearing Assemble
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Case Cover Bearing Assemble



Case Cover Bearing Assemble

Tools Required
^ J 8092 Driver Handle
^ J 41991 Driveshaft Bearing Remover/Installer




1. Assemble J 8092 and J 41991 for bearing installation.
2. Place the case cover (400) on a clean, flat surface with the case mating surface up.

Important: When installing the new bearing the part number should be visible (facing upward).

3. Using the assembled tool, press the drive shaft bearing (431) into the case cover (400).

pro multis · About Operation CHARM