Front Bumper Shock Absorber: Service and Repair

Front Bumper Fascia Energy Absorber Replacement

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure




1. Remove the front bumper fascia.
2. Remove the plastic screws from the front energy absorber.




3. Remove the front bumper energy absorber from the front bumper fascia.

Installation Procedure




1. Position the front bumper energy absorber to the front bumper fascia.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the front bumper energy absorber screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the front bumper fascia.