Shock Absorber Replacement

Shock Absorber Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear tire and wheel assembly.




3. Remove the lower shock bolt and nut.




4. Remove the upper shock bolt.
5. Remove the shock from the vehicle.

Installation Procedure

1. Position the shock to the vehicle.





Notice: Refer to Fastener Notice.

2. Install the upper shock bolt.

Tighten the bolt to 110 N.m (81 lb ft).




3. Install the lower shock bolt and nut.

Tighten the bolt to 110 N.m (81 lb ft).

4. Install the rear tire and wheel assembly.
5. Lower the vehicle.