Holding Fixture Installation

Holding Fixture Installation

Tools Required

* J 3289-20 Holding Fixture
* J 45159 Holding Fixture




1. Install the body of the J 45159 with the two long bolts (1) to the transaxle.
2. Loosely install the arm and bolt (2) to the J 45159 body.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the arm with the provided shorter bolt (3) to the transaxle.

Tighten the J 45159 to 25 N.m (18 lb ft) starting with bolt (3).

4. Install the J 45159 in the J 3289-20.