Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Housing: Service and Repair



AIR CLEANER ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the air cleaner intake duct.




2. Disconnect the mass air flow (MAF) sensor electrical connector.




3. Remove the air cleaner assembly bolt (2).
4. Remove the air cleaner assembly (1).
5. If replacing the air cleaner assembly, remove the MAF sensor.

INSTALLATION PROCEDURE
1. If the air cleaner assembly (1) was replaced, install the MAF sensor.




2. Install the air cleaner assembly (1) by inserting the two rubber alignment grommets into the radiator core support behind the right headlight.

3. NOTE: Refer to Fastener Notice.

Install the air cleaner assembly attachment bolt (2).

Tighten the bolt to 10 N.m (89 lb in).




4. Connect the MAF sensor electrical connector.
5. Install the air cleaner intake duct.