Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Accelerator Pedal Position Sensor: Service and Repair

Accelerator Pedal Position Sensor Replacement

Removal Procedure

1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
2. Remove the APP sensor bolts (1).
3. Remove the APP sensor (2).

Installation Procedure

1. Install the APP sensor (2).

Notice: Refer to Fastener Notice.

2. Install the APP bolts (1).

Tighten the bolts to 10 N.m (89 lb in).

3. Connect the APP sensor electrical connector.
4. Confirm that the APP sensor connector locking clip is fully secured.