Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

1. Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Remove the electrical connector from the engine oil pressure sensor.

Engine Oil Pressure Switch:

3. Remove the engine oil pressure switch.

Installation Procedure

Engine Oil Pressure Switch:

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the engine oil pressure switch.

Tighten the switch to 16 Nm (12 lb ft).

2. Install the electrical connector to the engine oil pressure switch.
3. Connect the battery negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).