A/C Evaporator - Replacement Procedure

Group
8

Number
8901

Model
928, 928S,
928 S4

Part Identifier
8760

March 17, 1989

Subject:
Replacing A/C Evaporator

If it becomes necessary to remove or replace the A/C evaporator proceed as follows.

1. Remove heater-air conditioner housing. Refer to 928 Workshop Manual Volume IV. page 87-97.

2. Remove expansion valve and capillary tube.





3. Remove clamps from heat exchanger housing and pry off housing (1 in figure).

Pull out heat exchanger (2 in figure).

Disconnect vent housing flaps.

Remove vent housing (3 in figure).

Remove rubber grommet from evaporator pipes and carefully remove evaporator (4 in figure) from evaporator housing (5 in figure).

Assembly Note:

Make sure housings are sealed properly, use sealing cord PN 999 911 214 50.