Crankshaft

DISASSEMBLING AND ASSEMBLING CRANKSHAFT





No. Description Qty. Notes

1 Radial oil seal 1 Replace
2 Thrust bearing 2 Check for wear - Lubricate
shells 1
3 Main bearing 12 Lubricate
shells 2 - 7
4 Bearing sleeve no.8 1 Lubricate
5 Round seal 1 Replace
6 Radial oil seal 1 Replace
7 Circlip 1
8 Drive gear for 1
distributor
9 Intermediate ring 1 Note installation position
10 Timing gear 1
11 Woodruff key 1
12 Connecting rod nut 12 Torque:
Stage 1: 20 Nm (14 ftlb)
Stage 2: 90° ± 2° of turn, thread and contact surface lightly oiled
13 Connecting rod 6 Note installation position and weight
14 Connecting rod 12 Check for wear - Lubricate
bearing shells
15 Connecting rod bolts 12 Always replace
16 Crankshaft 1 Check for wear