Rear Suspension

CAMBER, ADJUST




Camber adjustments are made by rotating the inner control arm bushing eccentric bolt.




TOE, ADJUST




Adjust toe by turning eccentric bolt on front control arm mount.




REAR AXLE HEIGHT, ADJUST

Fig. 5 Rear axle height measurement:

1. Measure distance from wheel ground surface to measuring surface on crossmember, Fig. 5. Height should be 6.4173-7.2047 inches (163-183 mm) with a maximum difference of .3937 inch (10 mm) between left and right side.
2. If height is not within specifications, turn adjusting nut clockwise to raise vehicle or counterclockwise to lower vehicle.