Crankcase and Crankshaft

DISASSEMBLING AND ASSEMBLING CRANKCASE AND CRANKSHAFT





No. Description Qty. Notes

1 Crankshaft 1 Conrods 2-4-6 face up
2 Crankshaft seal 1 Replace,lubricate
3 Bearing sleeve 8 1 Make sure bearing engages in pin
4 Round seal 1 Replace,position correctly
5 Bearing shell - 2 Mark - Do not mix up used shells
main bearing 1
6 Bearing shell - 12 Mark
main bearings 2-7
7 Seal 2 Coat with grease
8 Nut M 8 3 Torque: 23 Nm (17 ftlb)
9 Lockplate 3 Always replace
10 Oil pump 1 Check movement
11 Connecting shaft 1
12 Intermediate shaft 1 Check pairing with drive gear on crankshaft and crankcase
13 Thrust bearing 2
for intermediate shaft
14 Intermediate shaft 2
bearing
15 Seal 1 Install with grease
16 Seal 1 Install with grease
17 Crankcase section, 1
right
18 Dilavar bolts 24