Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Procedures

SETTING CRANKSHAFT TO TDC IN CYLINDER NO.1

Crankshaft Position (Engine Installed)

TDC mark on flywheel and cast boss on clutch housing must be aligned.

Additional TDC mark on flywheel, seen from underneath car. TDC is reached, if the approx. 5 mm wide groove in the flywheel is in the middle of the opening of the clutch housing.

Crankshaft Position (Engine Removed)

TDC mark on flywheel and cast mark on upper crankcase section must be aligned.