Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 1989 >> 928 GT V8-4957cc 5.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Speed Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Speed Sensor: Testing and Inspection

ECU Connector Pin Identification:





ECU Connector Pin Identification

1. With ignition off, disconnect multiple pin connector from ECU.
2. Using an ohmmeter, measure resistance between terminals 7 and 19 of ECU connector. Correct resistance is 600---1600 ohms.
3. If resistance is not as specified, measure resistance directly at speed/reference mark sensor plug connector terminals 7 and 19. Correct resistance is 600---1600 ohms. If resistance is satisfactory, check wiring between sensor and ECU. If resistance is not satisfactory, replace sensor.

pro multis · About Operation CHARM