On-Board Diagnostic ME 5.2.2

Mode 6

The test results of components or Systems which are not continuously monitored are displayed in mode 6. At the same time, limit values are provided. The test resuits are referred to as TID (Test Identification). The components or systems are distinguished by CID's (Compopnent ldentification).

The following components or systems are supported;

TWC conversion, bank 1

TID $01 CID $01

TWC conversion, bank 2

TID $01 CID $02

Secondary air system, bank 1

TID $03 CID $03

Secondary air system, bank 2

TID $03 CID $04

Secondary air system, bank 1

TID $03 CID $05

Secondary air system, bank 2

TID $03 CID $06


Note

If the DME has performed active diagnosis, then CID's $03 and $04 are displayed.

If, however, diagnosis was passive, then CID's $05 and $06 are displayed.


EVAP canister purge valve

TID $05 CID $0A

EVAP canister shutoff valve

TID $05 CID $OB

Fuel tank ventilation system (major leak)

TID $05 CID $OC

Fuel tank ventilation system (micro-leak)

TID $05 CID $OD

EVAP canister shutoff valve

TID $05 CID $11

Fuel tank ventilation system

TID $05 CD $12

Fuel tank ventilation system

TID $05 CID $13

Fuel tank ventilation system

TID $05 CID $14