System Check

The System check menu item may be used to check all components triggering an alarm (except terminal 15). In this case, the alarm horn is only triggered twice for a short interval.

The following display appears after the System check menu item has been called:

Indicated on display
System check !
Continue: >

The individual components that may trigger an alarm (except terminal 15) can now be checked. E.g. if a door is opened, an alarm is triggered. At the same time, triggering of the alarm is stored in the result memory. After the check has been completed and the > key has been pressed, the following display appears:


Indicated on display
Note:
Erase result
memory
Return: N

The result memory must be erased since the check has been stored in the memory.