Data Output

Data Output With The System Tester.

DME/ECM (Digital Motor Electronics/Electronic Control Module)
M 07
From module version 8.0

System texts.

DME
System: M05MOTRONTC
SerNo.: XXXXXXXXXXX.

Possible fault displays

System unknown!
Fault memory only can be read..

< Some faults may not
be indicated under
certain conditions.

NOTE
- If these fault displays appear, check whether the program module used in the tester is version 8.0 or higher.
- If the DME/ECM is not recognized, the immobilizer is activated. Deactivate the immobilizer and start again.

Menu.

Menu
1 = Fault memory
2 = Drive links
3 = Input signals >.

< Menu
1 = Actual values
2 = Short test
3 = Vehicle data >.

< Menu
1 = Cycle flag
2 = CO adjustment.

Program version 14