Drive Link Texts

Drive links
1 = IAC valve
2 = A/C compressor
3 = Tank vent.

< Drive links
1 = Sec air pump
2 = Check engine
3 = Freq valve LDR

< Drive links
1 = Fuel pump.

The drive links listed above can be selected for a rapid test of the component and wiring. If both the components and the wiring are in satisfactory condition, the IAC valve, the magnetic coupling of the A/C compressor, the EVAP canister purge valve and the frequency valve for boost pressure control are switched after activation. The secondary air injection pump and the fuel pump run and the Check Engine light flashes until it is switched off.

The engine must not be running when the drive links are activated.