Removal/Installation

Tightening Specifications
Engine Carrier to Engine Mount (M12) 85 Nm (63 ft lb)
Transmission Carrier to Body (M12) 46 Nm (34 ft lb)
Drive Shaft to Transmission Flange (M10) 81 Nm (60 ft lb)
Oil Drain Plug to Thermostat Housing 50 + 5 Nm (37 + 4 ft lb)
Oil Drain Plug to Crankcase 50 + 5 Nm (37 + 4 ft lb)
Selector Rod (Fit Bolt) 18 Nm (13 ft lb)

NOTE: Lock Selector Rod (Fit Bolt) Additionally With Loctite 270

Stabilizer Bar to Crossmember (M8) 23 Nm (17 ft lb)
Stabilizer Mount to Shock Absorber (M10) 46 Nm (34 ft lb)
Link No.2 to Crossmember (ecc.) (M12 x 1.5) 85 Nm (63 ft lb)
Link No.2 (track rod) to Wheel Carrier (M12 x 1.5) 85 Nm (63 ft lb)
Rear Crossmember to Side Panels (M12 x 1.5) 120 Nm (88 ft lb)
Front Crossmember to Side Panel (M10) 65 Nm (48 ft lb)