Alignment Card - GT3

Alignment Card - GT3

Porsche Measurement Of Running Gear:

Since mainly electronic wheel-alignment testers in conjunction with printers are used, a specimen alignment card is rarely required nowadays. In order for measured results to be documented in individual cases, however, a copy of the alignment card shown above can be used.

NOTE:
- In practice this means that alignment cards cannot be ordered.
- The alignment cards can be used for all 911 GT3 (996), M002 = street vehicle and MOO3 = Club Sport version.

1. Prepare copies of the corresponding alignment card shown.
2. Before measurement, enter the general data, vehicle model and the missing nominal values (depending on model year/other values as of model year 2004) into the copied alignment card.

NOTE: Actual values that are identical in all versions have already been entered.

3. Enter the appropriate version, e.g. M002 or MOO3, in the Model column.
4. Carry out incoming measurement (actual state) and enter the values in the alignment card.
5. After adjustments (if these were necessary), enter the actual values in the column Outgoing measurement.