Rear Window

Removing and installing rear window
The following tools and materials are required for removal and installation of the rear window with two-component adhesive:

Special Tools:

Steps 1 - 6:

Steps 7 - 14:

Removing rear window

Procedure No. 1:

Procedures No. 2 - 5:

NOTE: The removed window can be re-installed if
- no prior damage can be seen on the rear window
- the rear window was removed without being damaged.


Fit rear window

Procedures No. 6 - 11:

Procedures No. 12 - 14:

Important
The bonded joint does not have its final strength immediately. In order to ensure that the bonded joint is sufficiently strong, the following boundary conditions must be adhered to:

Curing time 3 hours
Temperature min. 10 °C
Fixing time approx. 1 hour

The vehicle must not be used until the curing time has elapsed.