Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Alarm System Transponder: Service and Repair




Removing and installing signal converter/immobilizer

Removal
1. Disconnect the battery and cover the terminal or battery.
2. Remove left side vent (see Removing and Installing Main Light Switch).

3. The signal converter on the ignition steering lock housing can be removed through the opening in the dashboard.






4. Open the locking button with a (short) cross-head screwdriver (1/4 turn counter-clockwise). Pull the signal converter out of the holder to the rear.

The figure shows the signal converter without dashboard.






5. Unlock the electrical plug connection from above and disconnect. Remove signal converter housing out of the side vent opening.

Installation
1. Close locking button of the signal converter housing (1/4 turn clockwise).
2. Engage electrical plug connections and install side vent.
3. Connect the battery and perform a function test.