Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2001 >> 911 Turbo AWD (996) F6-3.6L Turbo >> Repair and Diagnosis >> Body and Frame >> Seats >> Testing and Inspection >> Seat Memory S02 >> Control Module Function >> Communication With Alarm System Control Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Communication With Alarm System Control Module





Communication With Alarm System Control Module

The two control modules "seat memory" and "alarm system" communicate via a signal lead. This enables adjustment of the mirror and seat positions via the hand-held transmitter. If required positions of the rearview mirror and driver's seat are assigned to a hand-held transmitter, the rearview mirror and driver's seat move to these positions as soon as the vehicle is unlocked with the hand-held transmitter.

The PST 2 can be used to test the communication line between the two control modules for an open circuit. Proceed as follows:
1. Connect PST 2 and switch on ignition.
2. Select "Seat memory" control module
3. Select "Alarm system interface level" in the menu item "Input signals"
4. Press the locked/unlocked button of the hand-held transmitter

The switch position on the PST 2 is closed briefly.


NOTE: The adjustment function via the hand-held transmitter is correct only if the radio code and the transponder code of a hand-held transmitter are each stored at the same position in the alarm system control module.
pro multis · About Operation CHARM