Emergency Triggering/Manually Retracting

Emergency triggering
If the roll-over bars cannot be triggered using the diagnostic module they can be triggered mechanically via a sealed hole in the actuator.

CAUTION: Risk of injury if the roll-over bar is triggered!

- The range of movement of the roll-over protection system must be kept clear during emergency triggering.

Procedure

Manual Unlocking:

1. Insert a screwdriver into the hole in the module and press it against the top edge of the pawl.
2. Press the screwdriver to the left (arrow A) and hold it while pressing down (arrow B). The roll-over bar is triggered.

Retracting the roll-over bars
The rollover bars can be retracted by hand.

Procedure

Manual Retraction:

1. Press the paw to the right.
2. Press the roll-over bar down with your hand.