Setting the Lowering Angle of the Passenger's Rearview Mirror

Setting the Lowering Angle of the Passenger's Rearview Mirror

NOTE: The lowering angle of the passenger rearview mirror can be adjusted with the PST 2 only!

1. Connect the PST 2 with the ignition off, then switch the ignition on.
2. Switch on the PST 2 and wait for the start-up screen.
3. Press the [>>] key to the next level.
4. Select the vehicle type 911(996) in the left-hand window using the [down arrow] key.
5. Press the [-->] key to activate the right-hand window.
6. With the [down arrow] key, select the "Seat memory" control module and press the [>>] key to the next level.
7. With the [down arrow] key, select Modify coding and press the [>>] key to the next level.
8. Select the menu item -Lowering- using the [down arrow]/[up arrow] key.
9. Press the [>>] key to alter the coding.
10. Adjust the lowering angle using the [down arrow]/[up arrow] key.
11. Press key [F8] (coding).

NOTE: The lowering angle is now set!