Installing

1. Install and fasten starter. Fasten B+ lead from the battery and B+ lead from the engine to the B+ disconnection point to terminal 30 (M8 nut) on the solenoid switch.
2. Fasten terminal 50 lead (M6 nut) to the solenoid switch.

Tightening torque:
M8 hexagon nut 15 Nm (11 ft.lbs)
M6 screw 6.5 Nm (5 ft.lbs)
M10 hexagon-head bolt 46 Nm (34 ft.lbs)

3. Push protective cap over the solenoid switch and engage in the B+ lead.
4. Connect the battery and perform a function test.