Overhaul

Disassembling And Assembling Rear Cover













Replacing model logos

Replacing the Boxster model logo







1. Determine the middle of the cover.
2. Position the -Boxster- logo with the dimensions -A and B = 141 mm- and -C = 45 ± 1 mm- on the rear cover and affix.

Replacing the Boxster S model logo







1. Determine the middle of the cover.
2. Position the -Boxster S- logo with the dimensions -A and B = 177.3 mm-, -C = 55 ± 1 mm- and -D = 50.4 mm- on the rear cover and affix.

Test and adjusting values

INFORMATION:
- Illustration of the gap dimensions.
- Refer to Gap dimensions, body.