Cruise Control Servo: Adjustments

Sequence 1...4

1. Loosen snap ring 1 at adjusting piece 2 (displace it) and push threaded part 3 through along with cruise-control cable.
2. Engage cruise-control cable on cruise-control actuator and clip on adjusting piece 4 (bayonet lock).
3. Unscrew threaded part 5 until the accelerator plate is noticeably pulled.
4. Draw accelerator plate firmly back against its idle stop.




Sequence 5...7
5. Push snap ring 6 back (fixing it).
6. Make fine adjustment by turning the
threaded part 7.
Permissible play: 0 + 1 mm.